Fix Your Memory Module
 
Home
News
Products
Shop
Memory
Corporate
Contact
 

News
Industry News
Publications
CST News
Help/Support
Member Area
Tester Brochure
Demo Library
Software
Tester FAQs

biology medicine news product technology definition

Sunday, August 19, 2018
Memory Industry News
Email ArticlePrinter Format PreviousNext

Chinese NAND manufacturer to take different approach for production yield


Tuesday, August 07, 2018

Yangtze Memory Technologies Co. (YMTC) revealed more details about its 3D NAND plans ahead of a talk on Tuesday at the Flash Memory Summit. The company aims to deliver 256-Gbit chips late next year supporting data rates up to 3.0 Gbits/s, more than twice as fast as the competition.

YMTC’s talk will mark the first public discussion of an effort from China to produce leading-edge memory chips. Analysts were skeptical of the new product’s impact given that it will be behind rivals in density and the company has yet to prove that the chips can reach commercial yields.

Plans for the 64-layer, 3-bit-per-cell chips emerge at a time when rivals Intel, Micron, Samsung, and Toshiba/WD have announced or are shipping 96-layer, 4-bit-per-cell devices delivering 256 Gbits and above. Samsung said that its chips will support data rates up to 1.4 Gbits/s while others are expected to run at 1.0 Gbits/s.

The so-called Xstacking approach at YMTC aims to increase bit density by making NAND and I/O arrays on separate die. The chips are bonded with millions of what YMTC describes as metal vertical interconnect accesses created in a single process step.

YMTC claims that its approach significantly increases NAND bit density and helps it achieve as good or better cost per bit as competitors. The technique also shortens product development time by at least three months and manufacturing cycle time by 20%, said the company. In addition, it opens a door to customizing chips by adding unique logic functions to the I/O die, initially made in a 180-nm process.

“This is going to be a game changer in the NAND industry,” said Simon Yang, chief executive of YMTC, in a press statement.

The chips will work with multiple flash controllers, said the company, but it did not provide names of any partners. Meanwhile, it plans to be in volume production of conventional 32-layer NAND chips by October, and it has a second-generation Xstacking product in development.

YMTC has been working for years on its flash chips and its 32L plans are on track with its stated roadmap,” said Alan Niebel, memory analyst at Web-Feet Research. However, “it has a difficult challenge to bring yields up, actually manufacture parts, and still catch up with the incumbents that are three generations ahead.”

“I am not sure whether the market will adopt something that has a high-speed interface in front of a slow memory technology — NAND flash is really slow,” said Jim Handy, memory analyst at Objective Analysis. “I would guess that ONFi and Toggle Mode would perform about as well.”

“PMC Sierra and Toshiba showed off something similar [to Xstacking] a few years ago at the Flash Memory Summit,” he added. “It used a very high-speed PMC logic chip under a stack of NAND chips that connected through TSVs. YMTC’s approach is a little different because it doesn’t use the costly TSVs in exchange for being able to stack only a single NAND chip above the logic chip.”

Without a new approach, I/O circuits will rise from taking up 20% to 30% of a 3D NAND die today to more than 50% for chips with 128 layers and beyond, said YMTC.

“As monolithic die density increases with each successive generation of 3D NAND, it becomes much more challenging to maintain or improve performance for a given [sold-state drive] capacity,” said Gregory Wong, principal analyst at Forward Insights, quoted in YMTC’s press statement. “Higher I/O speed and multi-plane operation will be necessary to achieve the required SSD performance going forward.”

The company, described as the pride of China, has long been seen as one of the country’s most likely candidates to deliver a commercially viable mainstream memory chip. It was founded in 2016 with a whopping $24 billion in funding, leveraging the 12-inch fabs of China’s XMC in Wuhan.

The YMTC news comes at a time of heightened trade tensions between the U.S. and China, where semiconductors have been a particular flash point.

Industry trade groups have long lobbied the U.S. government to help set a level playing field in China. The China government is investing heavily in chips and requiring foreign firms to transfer their technology in exchange for market access, they claim. However, they protested the Trump administration’s recent tariffs as an ineffective and even harmful approach.

In an announcement last week, YMTC said that its Xtacking chips will be used in UFS as well as client and enterprise solid-state drives for use in smartphones, PCs, and data centers. The company will target global customers with the 48-layer chips, it said in an email exchange.

Ironically, Samsung, which was the first company to announce commercial 3D NAND chips at the Flash Memory Summit, is not participating in the event this year. The gap leaves YMTC an opening to be the talk of the show, at which all of the other major flash vendors are participating.

By: DocMemory
Copyright © 2018 CST, Inc. All Rights Reserved

Email ArticlePrinter Format PreviousNext
Latest Industry News
Purdue scientists combines transistor and laser on new FET8/17/2018
EDA giant Cadence Design to expand into Nanjing, China8/17/2018
Infineon to post and sell its IoT chips on Chinese e-commerce site8/17/2018
Nvidia demonstrates ray tracing speed graphics card with GDDR68/17/2018
Job posting implies Apple looking at a health processor8/16/2018
3 more flaws found on Intel Xeon processor8/16/2018
Turkey increased tariffs on certain U.S. products in retaliations8/16/2018
U.S. productivity growth at 2.9 percent8/16/2018
5G roll out in India to detlay8/15/2018
DRAM industry increased its second quarter output to $25.69 billion8/15/2018

CST Inc. Memory Tester DDR Tester
Copyright © 1994 - 2018 CST, Inc. All Rights Reserved