Specifications
Electrical Specifications
- Powerful high-speed single-chip Motorola micro-controller to manage all the I/O tasks.
- Equipped with 80 built-in data bits and test capacity up to 4 Gigaword.
- 2 Lines x 40 Alphanumeric Characters Liquid Crystal Display.
- 5 programmable function keys.
- Support Centronic Printer Port and Automatic Handler Interface.
- RS-232 Serial Port for Optional PC Interface and Firmware ROM upgrade capability.
Memory Types and Packages
Same base tester with optional plug-on adapter supports :
- DRAM - 30pin, 72pin SIMM , 168 pin DIMM, 72pin & 144 pin SODIMM (Optional Adapters)
- 100mhz SDRAM - 168pin DIMM, 144 pin SODIMM (Optional Adapter)
- PCMCIA DRAM Card Adapter (Optional)
- Supports all standard DRAM Extended Data Out (EDO) and Fast Page Mode (FPM) modules.
- Standard JEDEC 30-pin, 72-pin SIMM and 168-pin DIMM
- Testing true 5.0V and 3.3V DRAM devices
Test Capabilities
- Auto ID of memory size, access mode type and speed identification in seconds.
- Clear Pass / Fail results with printing option
- Provide standard pre-set test parameters.
- User-define test parameters option.
- Access timing range from 0 ns to 150ns in 1 ns resolution.
- Up to 80 bits data field with maximum 4 banks.
- 4 GB addressable field up to 16 row x 16 column
- Normal, Page Mode, EDO Access Mode & SDRAM 66mhz & 100mhz selectable
- Up to 10 Present Detects bits
- SPD Programming capability for SDRAM & SODIMM adapter only.
- Software control Vcc voltage : 4.5V, 5.0V, 5.5, 3.0V, 3.3V or 3.6V
- User selectable test pattern :- walk address, walk data, marching test, checker board test.
- Error detection scheme - single bit error, open and short error, refresh(data retention) error, cross-cell contamination and access time error.
Power Requirements
- Power Adapter : Input 100 - 250Vac
Frequency - 50 - 60 Hz
Output - 12V @2A
Operating Temperature
- 32° F to 100° F ( 0° C to 60° C )
Physical Dimension
- L x W x H : 9.30" x 9.25" x 2.00" (236mm x 235mm x 51 mm)
- 6 lbs. ( 3 Kg )
VIRTUAL DEMO HOME PAGE