| RoboFlex II |
Module Supported
 | 184pin & 168pin DIMM
144pin & 200pin SODIMM
100pin DIMM Optinal |
Module Size
| Height: 1" to 1.75"
Length: 5.24" +/-0.05"
Thickness: 0.05" +/-.04 |
No. of DIMM per input tray
| 60 - 100 TSOP DIMMs (single side)
40 - 60 TSOP DIMMs (double side) |
Output tray stacker
| Similar to input tray capacity |
Handler throughput
| Input Tray + Transfer + Stacking = 5 sec
(Zero test time) |
Test contacts
| Heavy duty test socket (Yamaichi)
Lifespan contact: 100K cycles
Resistance: 10 milliohm |
Power requirement
| Switching Power Supply
Input 100 ~ 250VAC, 50-60Hz
Output ~ 12V @ 2A |
Compress air
| 70 - 100 PSI @ 5CFM regulated Air |
Operating Temperature
| 32 ~ 100 degree F |
Physical Dimension
| 24" x 19" x 7" (H x W x D) |
Handler Weight
| 35 pounds |
| RoboFlex I |
Input Module Size
| Thickness:0.050 " +.004/-.003"single sided or double sided
Height:1.0 " to 1.7 "
Length 5.25" +/- 0.05" |
Capacity
| Input:
60 single-sided (w/SOJ) parts maximumed
40 Double-sided (w/SOJ) parts maximum
60-100 single-sided parts maximum(w/TSOP or CSP)
40-60 Double-sided parts maximum(w/TSOP or CSP)
Output:
Two Bins ( Good & Bad Bin) |
Tester Interface
| Mates to 15 pin "D" Connector Plug
Pin 1 5V DC output, 100ma maximum
Pin 3 PASS (From tester)
Pin 4 FAIL (From tester)
Pin 5 Test Start (To Tester) 10ms high going low
Pin 9 Ground, Common return
Pin 6 External motor control |
Performance Characteristic
| Handling Throughput: 2 sec @ 0 Test Time |
Physical
| Dimension 24" x 19" x 7" (HxWxD)
Handler Weight: 30 Pounds |
Facilities
| Air: 70 PSI @ 5CFM Regulated air to Handler
Air: 90 PSI @ 5CFM Regulated air to Label Arm Assembly
Power 95VAC-260VAC 50/60Hz Universal 20 Watts |
Test contacts
| Heavy duty test socket (Yamaichi)
Lifespan contact: 100K cycles
Resistance: 10 milliohm |
Consumable Parts
| Test Socket : 100,000 cycles |
Input Trays
| Universal input tray for modules up to 5.25 X 1.75"
Optional size trays available - contact CST for details. |
