Memory FAQs
 
Home
News
Products
Shop
Memory
Corporate
Contact
 

Clock Reference
DDRII
DDR333
DDR333 Specs
DDR333 Features
Brochure
Test Options
Support
Products
SP3000
Eureka2
Ez SPD
Handler
Clock Reference
DocMemory
Help/Support
Member Area
Tester Brochure
Demo Library
Software
Tester FAQs

biology medicine news product technology definition

Wednesday, October 31, 2018
Buy Clock Reference Online

Clock Reference Boardspecs

DDR Clock Reference Board General Specifications
Frequency
100 mhz , 133mhz
Data Rate
200mhz , 266mhz
Support
PC1600 and PC 2100 DDR module (Registered and Unbuffered)
Connector
184 pin Standard DIMM connector
Power Supply Options
3.3Volts: VDD for frequency synthesizer and buffer chips
3.3Volts: VDD for DIMM socket (or tie directly to first 3.3 Volt supply)
2.5Volts: VDDQ for frequency synthesize
Two Clock Reference Nets
184 pin DDR Unbuffered DIMM Clock net
184 Pin DDR Registered DIMM Clock net
Selectable Modes
Clocks On/Off
Spread Spectrum Enable / Disable
100 Mhz / 133 Mhz Frequency Selection
PLL On / Off
Card Size
7.9" x 3.725" x 0.05
Associated Test Equipment Required for DDR Clock Ref Board
2 Power Supplies
3.3 Volts (use 2 single or 1 dual power supply)
2.5 Volts
Oscilloscope recommended characteristics
Sampling Rate (real time) - Minimum of 4 Gsamples/second
RMS Jitter - < 6ps +/- 0.05% of delay setting
Probes recommended characteristics
Rise time -<140ps
Bandwidth (-3dB) > 2.5GHz
Input Resistance - 100k
Input Capacitance - 0.6pF
PC133/100 Clock Reference Board General Specifications
Frequency
100 Mhz and 133Mhz Operation
Support
PC100 / PC133 SDRAM DIMM Module (Registered)
Connector
168pin Standard DIMM connector
Power Supply Option
3.3Volts: VDD for frequency synthesizer and buffer chips
3.3Volts: VDD for DIMM socket (or tie directly to first 3.3 Volt supply)
2.5Volts: VDDQ for frequency synthesizer
Three Clock Reference Nets
168 Pin PC100 Unbuffered DIMM clock net
168 Pin PC100/PC133 Registered DIMM clock net
Clock buffer standard test load
168 Pin standard DIMM connector
4 clocks wired (supports Registered or Unbuffered DIMMs)
CKE, CS pins tied inactive, other 'registered' DIMM inputs tied low
Selectable Modes
Clocks on/off
Spread spectrum enable/disable
100MHz/133MHz frequency selection
Physical
Card Size: 7.9" x 3.725" x .05"
Coupons for measuring board impedance
Associated Test Equipment Required
Bench triple outlet power supply or 3 seperated power supply for : 3.3Vdc, 3.3Vdc, 2.5Vdc
High Frequency Digital Oscilloscope:
- 1Ghz bandwidth minimum
- 2 each high impedance scope probes (0.5-1pf)
CST Inc. Memory Tester DDR Tester
Copyright © 1994 - 2018 CST, Inc. All Rights Reserved