There was some doubt about Micron's intentions for phase-change memory as it had been researching the technology but scaled back its efforts in 2005 and thereafter in an apparent rejection of the non-volatile memory technology. Numonyx has a significant position in NOR flash memory but has also been sampling phase-change memory chips based on technology originally developed by Ovonyx. So it was not clear whether Micron would support or cut the phase-change memory program.

Now Micron (Boise, Idaho) has had an article published by EE Times entitled The evolution of phase-change memory authored by Micron senior fellow Greg Atwood.

Atwood joined Numonyx in 2008 as the company's first senior fellow before transferring to Micron with the acquisition. In the conclusion to his article Atwood said phase-change memory is "ready for prime time as a next-generation nonvolatile memory." He said that PCM is suitable as a storage-class memory and predicted it would be used in solid-state disk drives to drive higher performance than NAND flash memory at power consumption figures lower than RAM. Thereafter, and as systems software evolves, PCM will be able to move from an I/O drive based usage model to memory-mapped "main memory" usage, Atwood has written.

Atwood shows a die shot of the 45-nm 1-Gbit phase-change memory in the article. However, he does not comment on the status of the product and calls it a "demonstration vehicle." Numonyx has been sampling a 128-Mbit phase-change memory implemented in a 90-nm process technology since 2008, but opted to jump over the 65-nm node to create its next part on 45-nm process technology. That shipping of that part has been delayed but it is expected to sample some time in 2010 with volume manufacture available in 2011.

Micron's support for the technology as demonstrated in this authored paper at least makes that more likely to happen.

By: DocMemory
Copyright © 2023 CST, Inc. All Rights Reserved