At the end of 2015, there were 95 production-class IC fabs utilizing 300mm wafers (there are numerous R&D IC fabs and a few high-volume fabs that make “non-IC” products such as CMOS image sensors using 300mm wafers, but these are not included in the count).

?Currently, there are eight 300mm wafer fabs scheduled to open in 2017, which would be the highest single-year increase since 2014 when nine 300mm fabs were added.

By the end of 2020 there are expected to be 22 more 300mm fabs in operation, bringing the total number of 300mm fabs used for IC fabrication to 117.

If 450mm wafers enter production, the peak number of 300mm fabs may be somewhere around 125. For comparison, the highest number of volume-production 200mm wafer fabs in operation was 210 (in December of 2015 there were 148).

Today’s 300mm wafer fabs can be huge, but they are being equipped in a modular format, with each “module” generally having the capacity to process somewhere around 25K-45K wafers per month. Each module is closely connected to nearby fab modules. TSMC has perfected this modular approach, with its Fab 12, 14, and 15 sites being expanded in phases.

Development of 450mm wafer technology continues to progress toward production, albeit at a tempered pace. Since lithography is one of the biggest challenges in the 450mm wafer transition, ASM Lithography’s announcement in March 2014 that it would temporarily hold off on the development of equipment for 450mm wafers made some in the industry believe it was a signal that the transition would never happen. ASML reported also that the decision to postpone its 450mm development program was made at the request of its customers.

IC Insights does not believe that ASML’s announcement, along with a couple other signs of a pause in 450mm development, means the 450mm wafer transition won’t happen, but they do indicate that the pilot production status for 450mm won’t be reached until probably 2019. Volume production might start two to three years after that.

By: DocMemory
Copyright © 2023 CST, Inc. All Rights Reserved