Home
News
Products
Corporate
Contact
 
Friday, June 18, 2021

News
Industry News
Publications
CST News
Help/Support
Software
Tester FAQs
Industry News

Texas Instruments has quietly maintained leadership in the analogue world


Friday, June 4, 2021

With analogue sales of $10.9 billion and 19% market share, Texas Instruments maintained its firm grip as the leading supplier of analogue devices in 2020, according to IC Insights’ April Update to the 2021 McClean Report.

TI’s analogue sales increased about $650 million or 6% compared to 2019. TI’s 2020 analogue revenue accounted for 80% of its $13.6 billion in IC sales and 75% of its $14.5 billion in total semiconductor revenue,

The ten leading analogue IC suppliers for 2020 (Figure 1) accounted for $35.4 billion in analogue IC sales and represented 62% of the total $57.0 billion analogue market last year, the same share they held in 2019.

About half of TI’s analogue devices were manufactured on 300mm wafers in 2020. The company has stated previously that fabricating analogue ICs on 300mm wafers reduced the cost of unpackaged parts (at the die level) by 40% compared to production using 200mm wafers.

Fully packaged and tested ICs made on 300mm wafers cost about 20% less than those fabricated in 200mm fabs, according to TI.

With such significant cost savings, TI announced plans to build a 300mm fab in Richardson, Texas, to support future analogue growth. The new fab will be located next to its existing 300mm RFAB plant. TI executives last year hinted the fab would likely begin production by 2022.

Second-place Analog Devices (ADI) saw its 2020 analogue IC sales decrease 1% to $5.1 billion, which represented 9% marketshare.

ADI says its analogue devices, including many of those it obtained through its 2017 acquisition of Linear Technology, address opportunities “from sensor-to-cloud, DC to 100 gigahertz and beyond, and nanowatts to kilowatts.”

ADI claims more than 125,000 customers worldwide. Its 2020 sales by end-use application were industrial (53%), communication (21%), automotive (14%), and consumer (11%).

Vaulting into third place in the 2020 ranking was Skyworks Solutions. Skyworks is focused on front-end modules and power amplifiers for handsets and smartphones, highly integrated SiP and SoC devices for wireless infrastructure, power management chips, precision analog components, WiFi connectivity modules and ICs, and smart energy ICs for ZigBee and Bluetooth applications.

Skyworks noted that its exceptional growth in 2020 was driven primarily by an increase in overall demand for wireless connectivity products coupled with the onset of technology upgrade cycles including for 5G and Wi-Fi 6 solutions.

Additionally, its average content per device for these next-generation solutions increased. The company said its devices were part of the 5G-smartphone launches at Samsung, Oppo, Vivo, Xiaomi and other Tier-1 players.

Each of Europe’s three major IC suppliers—Infineon, ST, and NXP—was ranked as a top-10 analogue supplier in 2020. Collectively, they accounted for 17% of global marketshare, one point less than in 2019.

Infineon was the highest ranked European analogue supplier with sales up 2% to $3.8 billion. Infineon continues to grow its presence in automotive (41% of 2020 sales) and power/sensor systems (31% of 2020 sales) applications. Industrial power control (16%) and connected security (11%) round out its other major end-use applications.

ST was ranked at number five with analogue sales that slipped 1% to $3.3 billion (6% marketshare) and NXP was ranked number six with sales of $2.5 billion (4% marketshare).

ST’s analogue focus is on motion control (motor driver ICs and high-voltage driver ICs), automation (intelligent power switches), and energy management (powerline communication ICs) applications.

A key growth area for NXP is automotive, where its analog sales are essential components in emerging systems such as LiDAR, vehicle networks, and 5G.

It should be noted that IC Insights’ ranking of top analogue sales is based on the definition established by WSTS, that reads, “Devices are classified as analogue if at least 50% of the total die area of the integrated circuits(s) in the device is occupied by analogue circuitry.”

Some analogue companies embed less than 50% analogue circuitry onto their various logic chips, for example.

IC Insights classifies these devices as application-specific logic or another type of component, based on WSTS definitions.

By: DocMemory
Copyright © 2019 CST, Inc. All Rights Reserved

CST Inc. Memory Tester DDR Tester
Copyright © 1994 - 2019 CST, Inc. All Rights Reserved