SP3000 specs

SP3000 Specification
Clock Frequency	800mhz, 667Mhz 533Mhz, 400mhz (Selectable for DDR2 800mhz ver) 533Mhz, 400mhz, 333Mhz, 266Mhz (Selectable for DDR1 533mhz ver) 440Mhz, 400mhz, 333Mhz, 266Mhz (Selectable for DDR1 400mhz ver) 350Mhz, 333mhz, 266Mhz, 200Mhz (Selectable for DDR1 333mhz ver) 133Mhz, 100Mhz, 66Mhz (Selectable for SDRAM 133mhz ver )
Address Depth	4 Gigaword test capacity up to 16 rows x 16 columns
Data Width	72 Bits Data Field with 4 banks (DDR1, SDRAM, EDO/FPM) 72 Bits Data Field with 4 & 8 banks (DDR2 only)
Timing Range	0 ns to 100 ns
Timing Resolution	1 ns DDR2 DDR1 SDRAM , 2 ns DRAM EDO
Vcc Range	3.0V - 5.5V with 10% bouncing (For DRAM/SDRAM) 2.3 V - 2.7 V ( For DDR1 ) 1.7 V - 1.9 V ( For DDR2 )
Refresh Cycle	Auto/Self Refresh - 8us/Row to 64us/Row
Serial PD	256 Bytes programmable
Auto Identification	Automatic Identificaton of Module Frequency, Module Configuration, Size, Access Time, Bank Control, or Default Auto-ID
Error Detection	Easy to read LCD Display. Buzzer Signal for Pass/Fail Status Indication. Color LED indicators for Test, Pass, and Fail Status. Print Test Result
Test Pattern	User Editable Test Pattern. EDO:- Walk Data, Walk Address, Marching, Checkerboard, RAS/CAS, SPD Address SDRAM:- Walk Data, Walk Address, Marching, Checkerboard, CKE, CS, DQM, Burst, CAS Latency, SPD Address, Program Serial PD Data - read, write verify in one simple step DDR1:- Walk Data, Walk Address, Mat-S, March-Y, March-X, March-C, Moving Inversion, CKE, CS, DQM, Burst, CAS Latency, SPD Address, Program Serial PD Data - read, write verify in one simple step DDR2:- Walk Data, Walk Address, Mat-S, March-Y, March-X, March-C, Moving Inversion, CKE, CS, DQM, DQS, ODT,OCD, Burst, CAS Latency, SPD Address, Program Serial PD Data - read, write verify in one simple step
SPD Testing & Programming	256 Bytes programmable Read & Store SPD Content up to 256 bytes. Functional Testing and SPD Programming in a single step. Selectable Byte or Page Write. Byte Masking Option for Serial Number and Data Code
Power Requirements	Input 110 to 250 VAC; Frequency 50-60 Hz
Operating Temperature / Humidity	15 degree F to 110 degree F / 20%-80% non condensing
Physical Dimension	6lbs (3kg) / LxWxH : 9.3" x 9.25 " x 2.00"
Enhancement Features
Upgradibility	Firmware Upgrade via Internet. Universal base tester with optional Plug-on Adapters handles a wide range of Module variation.
Adapter Support	Easy Plug-on Adapter with options for DDR2, DDR1, SDRAM, DRAM, PCMCIA, Sun, SGRAM and Chip Testing. BGA Chip, DIMM, SODIMM, SIMM and various option adapters available. Contact CST for pin compatiblity
Interface Features	RoboFlex Automatic Handler Interface. Firmware Upgrade via Internet. PC Interface for Device/SPD File Management on PC. Including graphic Module Picture Drawing. Heavy Duty Test Sockets